Logistics / Supply ChainVerified Real deployment at a named or precisely described company, with a measured result from a primary source.

Truck time slots and AI yard control cut waiting at the plant gate and loading docks (Coca-Cola HBC Austria, MTU Aero Engines, Smurfit Westrock)

Added 2026-11-12 · Last updated 2026-11-12

Manufacturers in this case: Coca-Cola HBC Austria · MTU Aero Engines · Smurfit Westrock · all manufacturers using AI

Role

Plant logistics (shipping and receiving, gate, yard and loading docks) · Typical users: logistics manager, shipping and receiving supervisor, warehouse lead, gate or security team, transport planner

The problem

Trucks arrive at the plant when it suits the carrier: queues form in the morning, drivers wait during breaks, the yard and the street fill up, and forklifts and dock doors are idle one hour and overloaded the next. Gate staff record trucks by hand and nobody knows which load is ready. At MTU Aero Engines, about 60 inbound deliveries a day from some 500 service providers arrived mostly in the morning at four ramps, and the truck waiting area had to move to the road outside the plant. At the Coca-Cola HBC Austria bottling plant in Edelstal, up to 200 trucks a day had to be recorded, weighed and sent to the right place on site. At Smurfit Kappa's Hoya plant in Germany (now Smurfit Westrock), peak-time queues of about 20 trucks caused long waits and safety risks around the loading bays as production grew.

How AI helps

Carriers book a time slot on a web portal and send their freight data in advance; trucks that arrive without a booking get a slot at the gate. The yard system then decides, in real time, which dock door, which slot and which order to handle next. In INFORM's SYNCROSUPPLY, optimisation algorithms and AI weigh booked slots, actual arrival times, dock utilisation, available staff and load priorities, and re-plan as soon as something changes; at Coca-Cola HBC Austria they also take into account punctuality, whether the load is prepared, the driver's remaining driving time and loading progress. Drivers are guided with a driver app or traffic messages to the right bay. Planners keep control of the rules and exceptions.

Step by step

  1. Measure the starting point for two to four weeks: arrival time, check-in, dock start, dock end and departure for every truck, plus the queue at peak hours.
  2. Define dock capacity by hour and type of load (inbound, outbound, bulk, refrigerated), including breaks and shift changes.
  3. Start with slot booking for the biggest carriers and suppliers, keep a few free slots for unplanned trucks, and agree what happens to late trucks.
  4. Connect bookings to order and load status, so a truck is only called to a door when its load is ready and staff is available.
  5. Add real-time door assignment and re-planning once the booking discipline holds.
  6. Review weekly with carriers: on-time arrivals, gate-to-gate time, waiting time and detention charges.

Tools

  • INFORM SYNCROSUPPLY (time slot and yard management with optimisation algorithms and AI): used at Coca-Cola HBC Austria and MTU Aero Engines
  • Transporeon Time Slot Management: used at Smurfit Kappa Hoya (now Smurfit Westrock)
  • Other tools to evaluate: the dock scheduling module of your WMS or TMS, other yard management systems, a shared booking calendar for a first pilot
  • To size the problem without new software: a gate log export and any LLM (ChatGPT, Claude, Copilot, Gemini) with the prompt below

In the AI tools index: INFORM SYNCROSUPPLY · Transporeon Time Slot Management · all AI tools used by manufacturers

Result

Coca-Cola HBC Austria (INFORM success story; Austrian Logistics Award 2021): gate-to-gate time down 45% from check-in to departure, on-time completion up to 85%, full traceability of truck movements. MTU Aero Engines (INFORM success story): average inbound truck throughput time from 56 to 46 minutes, delivery peaks levelled and less traffic on site. Smurfit Kappa Hoya, now Smurfit Westrock (Transporeon case study, time slot booking without the AI yard optimisation): 70% of trucks on time or early, truck turnaround from 120 to 52 minutes, loading or unloading in 17 minutes, on-site queue from about 20 trucks to 4 or 5.

As reported by the source; most figures are vendor or self-reported and not independently verified.

Human review: cautions

  • Results come from vendor success stories (INFORM, Transporeon); Coca-Cola HBC Austria is a bottler and its figure combines slot booking, a driver app and optimisation.
  • The Smurfit Westrock result comes from slot booking alone, which shows how much of the gain is discipline and data rather than AI.
  • Carriers must accept the booking rules: involve the main ones early and keep free slots, or trucks will simply wait outside.
  • A slot system cannot fix a dock that is short of staff or loads that are not ready; check those first.

Try it yourself

You are a plant logistics analyst. I want to understand where trucks lose time at our site before we choose a slot booking or yard system.

I will paste: (1) a gate log export for the last two to four weeks [truck or carrier, inbound or outbound, booked time if any, arrival, check-in, dock start, dock end, departure, dock door]; (2) our dock doors and shift hours.

Do this:
1. Calculate the average and the 90th percentile of waiting time (arrival to dock start), dock time and gate-to-gate time, by carrier, by day of the week and by hour of arrival.
2. Show the hours when more trucks arrive than doors can handle, and how many doors are idle in the other hours.
3. List the carriers and suppliers that cause most of the waiting, and those that already arrive on time.
4. Propose a first time slot grid (slot length, slots per door per hour, free slots kept for unplanned trucks) based on the data.
5. List the data we are missing to go further.

Do not invent times: if a timestamp is missing, exclude the truck and count how many were excluded. Use only the data I paste in; if something is missing, write 'not found' or list it as a question instead of guessing. Do not send, order, post or change anything in any system: produce drafts for my review and approval.

Want more like this? Join the newsletter

Related cases

All 14 Logistics / Supply Chain use cases →

Sources

Weekly: 1–2 practical AI use cases for your plant

Newsletter in

Free, one email a week. By subscribing you agree to receive the weekly newsletter (and its sponsor message) from AI Agents for Manufacturing. Every email includes an unsubscribe link, and you can unsubscribe anytime. See our Privacy Policy.